• Cold-rolled steel
  • Hot dip galvanized steel
  • Aluminium-zinc coated steel
  • Electrogalvanized steel
  • Zinc-magnesium coated steel

Cold-rolled steel

Cold-rolled steel

Dimensions

Steel Thickness, mm Width, mm
DC 01 0,5-3,0 1000-1500
DC 03 0,5-3,0 1000-1500
DC 04 0,5-3,0 1000-1500
DC 05 0,5-3,0 1000-1500
DC 06 0,5-3,0 1000-1500
DC 07 0,5-3,0 1000-1500

 

Tolerances

Tolerances according to EN 10131:2006. Ask for more information!

 

Chemical composition and mechanical properties

Steel grade Steel number Chemical composition % Mechanical properties
P S Mn Ti Yield strength Rp 0,2     Tensile strength, Rm (N/mm²)       Fracture elongation, A80               
DC 01 1.0330 0,12 0,045 0,045 0,60 280  270 – 510 28%
DC 03 1.0347 0,10 0,035 0,035 0,45 240  270 – 370 34%
DC 04 1.0338 0,08 0,030 0,030 0,40 220  270 – 350 37%
DC 05 1.0312 0,06 0,025 0,025 0,35 200  270 – 330 39%
DC 06 1.0873 0,02 0,020 0,020 0,25 0,30 180  270 – 350 41%
DC 07 1.0898 0,01 0,020 0,020 0,20 0,20 160  250 – 310 43%

Surface finish and quality

Surface finish and quality  
A normal surface Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B improved surface This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.

 

Storage and warehousing 

  • Packaging must protect the material against defects and external influences.
  • The material must have appropriate packaging for transportation.
  • Max humidity 70%.
  • Recommended storage temperature + 15…25Co.
  • Min storage temperature + 5Co.
  • Max temperature fluctuation 10 degrees
  • Processing permitted if the material has reached a temperature of the plant.
  • In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
  • NB! Warehousing indoors only.

Hot dip galvanized steel

Hot dip galvanized steel

Dimensions

Steel Thickness, mm Width, mm
DX51D 0,4-3,0 1000-1500
DX52D 0,4-3,0 1000-1500
DX53D 0,4-3,0 1000-1500
DX54D 0,4-3,0 1000-1500
DX55D 0,4-3,0 1000-1500
DX56D 0,4-3,0 1000-1500
DX57D 0,4-3,0 1000-1500

 

Coating

Coating Weight g/m2
+Z zinc 100-600

 

Tolerances

Tolerances according to EN 10143. Ask for more information!

 

Chemical composition and mechanical properties

Steel grade Chemical composition % Mechanical properties
C max Si max Mn P S Ti Yield strength Rp 0,2       Tensile strength, Rm (N/mm²)             Fracture elongation, A80               
DX51D 0,18 0,50 1,20 0,12 0,045 0,30 270 – 500 22%
DX52D 0,12 0,50 0,60 0,10 0,045 0,30 140 – 300  270 – 420 26%
DX53D 0,12 0,50 0,60 0,10 0,045 0,30 140 – 260  270 – 380 30%
DX54D 0,12 0,50 0,60 0,10 0,045 0,30 120 – 220  260 – 350 36%
DX55D 0,12 0,50 0,60 0,10 0,045 0,30 120 – 220  270 – 370 30%
DX56D 0,12 0,50 0,60 0,10 0,045 0,30 120 – 180  260 – 350 39%
DX57D 0,12 0,50 0,60 0,10 0,045 0,30 120 – 170  260 – 350 41%

Surface finish and quality

Surface finish and quality
M reduced spangle The finish is obtained by influencing the solidification process in a specific way. The surface will have reduced spangles, in some cases, not visible for the unaided eye. The finish will be ordered if the normal spangle does not satisfy the surface appearance requirements.
A normal surface Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B improved surface This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.

 

Surface protection

Surface protection
C Chemically passivated Chemical passivation protects the surface against humidity and reduces the risk of formation of corrosion products during storage or transportation. Local colour variations are permissible and do not impair the quality.

 

Storage and warehousing 

  • Packaging must protect the material against defects and external influences.
  • The material must have appropriate packaging for transportation.
  • Max humidity 70%.
  • Recommended storage temperature + 15…25Co.
  • Min storage temperature + 5Co.
  • Max temperature fluctuation 10 degrees
  • Processing permitted if the material has reached a temperature of the plant.
  • In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
  • NB! Warehousing indoors only.

Aluminium-zinc coated steel

Aluminium-zinc coated steel

Dimensions

Steel grade Thickness, mm Width, mm
DX51D 0,5-2,0 1000-1500
DX52D 0,5-2,0 1000-1500
DX53D 0,5-2,0 1000-1500
DX54D 0,5-2,0 1000-1500
DX55D 0,5-2,0 1000-1500
DX56D 0,5-2,0 1000-1500
DX57D 0,5-2,0 1000-1500

 

Coating

Coating Weight  g/m2
+AZ aluminum-zinc alloy 150-185

 

Tolerances

Tolerances according to EN 10143:2006. Ask for more information!

 

Chemical composition and mechanical properties

Steel grade Steel number Chemical composition Mechanical properties
C max Si max Mn P S Ti Yield strength Rp 0,2      Tensile strength, Rm (N/mm²)            Fracture elongation, A80                
DX51D 1.0226 0,18 0,50 1,20 0,12 0,045 0,30 270 – 500 22%
DX52D 1.0350 0,12 0,50 0,60 0,10 0,045 0,30 140 – 300  270 – 420 26%
DX53D 1.0355 0,12 0,50 0,60 0,10 0,045 0,30 140 – 260  270 – 380 30%
DX54D 1.0306 0,12 0,50 0,60 0,10 0,045 0,30 120 – 220  260 – 350 36%
DX55D 1.0309 0,12 0,50 0,60 0,10 0,045 0,30 120 – 220  270 – 370 30%
DX56D 1.0322 0,12 0,50 0,60 0,10 0,045 0,30 120 – 180  260 – 350 39%
DX57D 1.0853 0,12 0,50 0,60 0,10 0,045 0,30 120 – 170  260 – 350 41%

 

Surface finish and quality

Surface finish and quality
M reduced spangle The finish is obtained by influencing the solidification process in a specific way. The surface will have reduced spangles, in some cases, not visible for the unaided eye. The finish will be ordered if the normal spangle does not satisfy the surface appearance requirements.
A normal surface Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B improved surface This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.

 

Surface protection

Surface protection
C Chemically passivated Chemical passivation protects the surface against humidity and reduces the risk of formation of corrosion products during storage or transportation. Local colour variations are permissible and do not impair the quality.

 

Storage and warehousing 

  • Packaging must protect the material against defects and external influences.
  • The material must have appropriate packaging for transportation.
  • Max humidity 70%.
  • Recommended storage temperature + 15…25Co.
  • Min storage temperature + 5Co.
  • Max temperature fluctuation 10 degrees
  • Processing permitted if the material has reached a temperature of the plant.
  • In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
  • NB! Warehousing indoors only.

Electrogalvanized steel

Electrogalvanized steel

Dimensions

Steel grade Thickness, mm Width, mm
DC01 0,5-3,0 1000-1500
DC03 0,5-3,0 1000-1500
DC04 0,5-3,0 1000-1500
DC05 0,5-3,0 1000-1500
DC06 0,5-3,0 1000-1500
DC07 0,5-3,0 1000-1500

 

Coating

Coating Thickness µm Weight g/m2
+ZE 25/25 2,0 18
+ZE 50/50 5,0 36
+ZE 75/75 7,5 54
+ZE 100/100 1,0 72

 

Tolerances

Tolerances according to EN 10131:2006. Ask for more information!

 

Chemical composition and mechanical properties

Steel grade Steel number Chemical composition % Mechanical properties
C P S Mn Ti Yield strength,  Rp 0,2       Tensile strength, Rm (N/mm²)             Fracture elongation, A80                R90 min N90 min
DC01 1.0330 0,12 0,60 0,045 0,045  – 280 270-410 28%
DC03 1.0347 0,10 0,45 0,035 0,035  – 240 270-370 34% 1,3
DC04 1.0338 0,08 0,40 0,030 0,030  – 220 270-350 37% 1,6 0,0170
DC05 1.0312 0,06 0,35 0,025 0,025  – 200 270-330 39% 1,9 0,0190
DC06 1.0873 0,02 0,25 0,020 0,020 0,30 180 270-350 41% 2,1 0,0210
DC07 1.0898 0,01 0,20 0,020 0,200 0,20 160 250-310 43% 2,5 0,0220

 

Surface finish and quality

Surface finish and quality
A normal surface Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B improved surface This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.

 

Storage and warehousing 

  • Packaging must protect the material against defects and external influences.
  • The material must have appropriate packaging for transportation.
  • Max humidity 70%.
  • Recommended storage temperature + 15…25Co.
  • Min storage temperature + 5Co.
  • Max temperature fluctuation 10 degrees
  • Processing permitted if the material has reached a temperature of the plant.
  • In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
  • NB! Warehousing indoors only.

Zinc-magnesium coated steel

Zinc-magnesium coated steel

Dimensions

Steel grade Thickness, mm Width, mm
DX51D+ZM 1,2-3,0 1000-1500
DX52D+ZM 1,2-3,0 1000-1500
DX53D+ZM 1,2-3,0 1000-1500
DX54D+ZM 1,2-3,0 1000-1500
DX55D+ZM 1,2-3,0 1000-1500
DX56D+ZM 1,2-3,0 1000-1500
DX57D+ZM 1,2-3,0 1000-1500

 

Coating

Coating Weight g/m² Thickness µm/side
ZM90 90 7
ZM120 120 9
ZM175 175 13
ZM195 195 16
ZM250 250 19
ZM310 310 24

 

Tolerances

Tolerances according to EN 10151. Ask for more information!

 

Chemical composition and mechanical properties

Steel grade Steel number Chemical composition % Mechanical properties
C max Si max Mn P S Ti Yield strength Rp0,2       Tensile strength, Rm (N/mm²)             Fracture elongation, A80               
DX51D+ZM 1.0226 0,18 0,50 1,20 0,12 0,045 0,30 270 – 500 22%
DX52D+ZM 1.0350 0,12 0,50 0,60 0,10 0,045 0,30 140 – 300  270 – 420 26%
DX53D+ZM 1.0355 0,12 0,50 0,60 0,10 0,045 0,30 140 – 260  270 – 380 30%
DX54D+ZM 1.0306 0,12 0,50 0,60 0,10 0,045 0,30 120 – 220  260 – 350 36%
DX55D+ZM 1.0309 0,12 0,50 0,60 0,10 0,045 0,30 120 – 220  270 – 370 30%
DX56D+ZM 1.0322 0,12 0,50 0,60 0,10 0,045 0,30 120 – 180  260 – 350 39%
DX57D+ZM 1.0853 0,12 0,50 0,60 0,10 0,045 0,30 120 – 170  260 – 350 41%

 

Surface finish and quality

Surface finish and quality
A normal surface Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B improved surface This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.

 

Storage and warehousing 

  • Packaging must protect the material against defects and external influences.
  • The material must have appropriate packaging for transportation.
  • Max humidity 70%.
  • Recommended storage temperature + 15…25Co.
  • Min storage temperature + 5Co.
  • Max temperature fluctuation 10 degrees
  • Processing permitted if the material has reached a temperature of the plant.
  • In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
  • NB! Warehousing indoors only.