Tolerances according to EN 10131:2006. Ask for more information!
Chemical composition and mechanical properties
Steel grade
Steel number
Chemical composition %
Mechanical properties
C
P
S
Mn
Ti
Yield strength Rp 0,2
Tensile strength, Rm (N/mm²)
Fracture elongation, A80
DC 01
1.0330
0,12
0,045
0,045
0,60
–
280
270 – 510
28%
DC 03
1.0347
0,10
0,035
0,035
0,45
–
240
270 – 370
34%
DC 04
1.0338
0,08
0,030
0,030
0,40
–
220
270 – 350
37%
DC 05
1.0312
0,06
0,025
0,025
0,35
–
200
270 – 330
39%
DC 06
1.0873
0,02
0,020
0,020
0,25
0,30
180
270 – 350
41%
DC 07
1.0898
0,01
0,020
0,020
0,20
0,20
160
250 – 310
43%
Surface finish and quality
Surface finish and quality
A
normal surface
Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B
improved surface
This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.
Storage and warehousing
Packaging must protect the material against defects and external influences.
The material must have appropriate packaging for transportation.
Max humidity 70%.
Recommended storage temperature + 15…25Co.
Min storage temperature + 5Co.
Max temperature fluctuation 10 degrees
Processing permitted if the material has reached a temperature of the plant.
In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
NB! Warehousing indoors only.
Hot dip galvanized steel
Hot dip galvanized steel
Dimensions
Steel
Thickness, mm
Width, mm
DX51D
0,4-3,0
1000-1500
DX52D
0,4-3,0
1000-1500
DX53D
0,4-3,0
1000-1500
DX54D
0,4-3,0
1000-1500
DX55D
0,4-3,0
1000-1500
DX56D
0,4-3,0
1000-1500
DX57D
0,4-3,0
1000-1500
Coating
Coating
Weight g/m2
+Z
zinc
100-600
Tolerances
Tolerances according to EN 10143. Ask for more information!
Chemical composition and mechanical properties
Steel grade
Chemical composition %
Mechanical properties
C max
Si max
Mn
P
S
Ti
Yield strength Rp 0,2
Tensile strength, Rm (N/mm²)
Fracture elongation, A80
DX51D
0,18
0,50
1,20
0,12
0,045
0,30
–
270 – 500
22%
DX52D
0,12
0,50
0,60
0,10
0,045
0,30
140 – 300
270 – 420
26%
DX53D
0,12
0,50
0,60
0,10
0,045
0,30
140 – 260
270 – 380
30%
DX54D
0,12
0,50
0,60
0,10
0,045
0,30
120 – 220
260 – 350
36%
DX55D
0,12
0,50
0,60
0,10
0,045
0,30
120 – 220
270 – 370
30%
DX56D
0,12
0,50
0,60
0,10
0,045
0,30
120 – 180
260 – 350
39%
DX57D
0,12
0,50
0,60
0,10
0,045
0,30
120 – 170
260 – 350
41%
Surface finish and quality
Surface finish and quality
M
reduced spangle
The finish is obtained by influencing the solidification process in a specific way. The surface will have reduced spangles, in some cases, not visible for the unaided eye. The finish will be ordered if the normal spangle does not satisfy the surface appearance requirements.
A
normal surface
Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B
improved surface
This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.
Surface protection
Surface protection
C
Chemically passivated
Chemical passivation protects the surface against humidity and reduces the risk of formation of corrosion products during storage or transportation. Local colour variations are permissible and do not impair the quality.
Storage and warehousing
Packaging must protect the material against defects and external influences.
The material must have appropriate packaging for transportation.
Max humidity 70%.
Recommended storage temperature + 15…25Co.
Min storage temperature + 5Co.
Max temperature fluctuation 10 degrees
Processing permitted if the material has reached a temperature of the plant.
In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
NB! Warehousing indoors only.
Aluminium-zinc coated steel
Aluminium-zinc coated steel
Dimensions
Steel grade
Thickness, mm
Width, mm
DX51D
0,5-2,0
1000-1500
DX52D
0,5-2,0
1000-1500
DX53D
0,5-2,0
1000-1500
DX54D
0,5-2,0
1000-1500
DX55D
0,5-2,0
1000-1500
DX56D
0,5-2,0
1000-1500
DX57D
0,5-2,0
1000-1500
Coating
Coating
Weight g/m2
+AZ
aluminum-zinc alloy
150-185
Tolerances
Tolerances according to EN 10143:2006. Ask for more information!
Chemical composition and mechanical properties
Steel grade
Steel number
Chemical composition
Mechanical properties
C max
Si max
Mn
P
S
Ti
Yield strength Rp 0,2
Tensile strength, Rm (N/mm²)
Fracture elongation, A80
DX51D
1.0226
0,18
0,50
1,20
0,12
0,045
0,30
–
270 – 500
22%
DX52D
1.0350
0,12
0,50
0,60
0,10
0,045
0,30
140 – 300
270 – 420
26%
DX53D
1.0355
0,12
0,50
0,60
0,10
0,045
0,30
140 – 260
270 – 380
30%
DX54D
1.0306
0,12
0,50
0,60
0,10
0,045
0,30
120 – 220
260 – 350
36%
DX55D
1.0309
0,12
0,50
0,60
0,10
0,045
0,30
120 – 220
270 – 370
30%
DX56D
1.0322
0,12
0,50
0,60
0,10
0,045
0,30
120 – 180
260 – 350
39%
DX57D
1.0853
0,12
0,50
0,60
0,10
0,045
0,30
120 – 170
260 – 350
41%
Surface finish and quality
Surface finish and quality
M
reduced spangle
The finish is obtained by influencing the solidification process in a specific way. The surface will have reduced spangles, in some cases, not visible for the unaided eye. The finish will be ordered if the normal spangle does not satisfy the surface appearance requirements.
A
normal surface
Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B
improved surface
This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.
Surface protection
Surface protection
C
Chemically passivated
Chemical passivation protects the surface against humidity and reduces the risk of formation of corrosion products during storage or transportation. Local colour variations are permissible and do not impair the quality.
Storage and warehousing
Packaging must protect the material against defects and external influences.
The material must have appropriate packaging for transportation.
Max humidity 70%.
Recommended storage temperature + 15…25Co.
Min storage temperature + 5Co.
Max temperature fluctuation 10 degrees
Processing permitted if the material has reached a temperature of the plant.
In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
NB! Warehousing indoors only.
Electrogalvanized steel
Electrogalvanized steel
Dimensions
Steel grade
Thickness, mm
Width, mm
DC01
0,5-3,0
1000-1500
DC03
0,5-3,0
1000-1500
DC04
0,5-3,0
1000-1500
DC05
0,5-3,0
1000-1500
DC06
0,5-3,0
1000-1500
DC07
0,5-3,0
1000-1500
Coating
Coating
Thickness µm
Weight g/m2
+ZE 25/25
2,0
18
+ZE 50/50
5,0
36
+ZE 75/75
7,5
54
+ZE 100/100
1,0
72
Tolerances
Tolerances according to EN 10131:2006. Ask for more information!
Chemical composition and mechanical properties
Steel grade
Steel number
Chemical composition %
Mechanical properties
C
P
S
Mn
Ti
Yield strength, Rp 0,2
Tensile strength, Rm (N/mm²)
Fracture elongation, A80
R90 min
N90 min
DC01
1.0330
0,12
0,60
0,045
0,045
–
280
270-410
28%
–
–
DC03
1.0347
0,10
0,45
0,035
0,035
–
240
270-370
34%
1,3
–
DC04
1.0338
0,08
0,40
0,030
0,030
–
220
270-350
37%
1,6
0,0170
DC05
1.0312
0,06
0,35
0,025
0,025
–
200
270-330
39%
1,9
0,0190
DC06
1.0873
0,02
0,25
0,020
0,020
0,30
180
270-350
41%
2,1
0,0210
DC07
1.0898
0,01
0,20
0,020
0,200
0,20
160
250-310
43%
2,5
0,0220
Surface finish and quality
Surface finish and quality
A
normal surface
Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B
improved surface
This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.
Storage and warehousing
Packaging must protect the material against defects and external influences.
The material must have appropriate packaging for transportation.
Max humidity 70%.
Recommended storage temperature + 15…25Co.
Min storage temperature + 5Co.
Max temperature fluctuation 10 degrees
Processing permitted if the material has reached a temperature of the plant.
In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
NB! Warehousing indoors only.
Zinc-magnesium coated steel
Zinc-magnesium coated steel
Dimensions
Steel grade
Thickness, mm
Width, mm
DX51D+ZM
1,2-3,0
1000-1500
DX52D+ZM
1,2-3,0
1000-1500
DX53D+ZM
1,2-3,0
1000-1500
DX54D+ZM
1,2-3,0
1000-1500
DX55D+ZM
1,2-3,0
1000-1500
DX56D+ZM
1,2-3,0
1000-1500
DX57D+ZM
1,2-3,0
1000-1500
Coating
Coating
Weight g/m²
Thickness µm/side
ZM90
90
7
ZM120
120
9
ZM175
175
13
ZM195
195
16
ZM250
250
19
ZM310
310
24
Tolerances
Tolerances according to EN 10151. Ask for more information!
Chemical composition and mechanical properties
Steel grade
Steel number
Chemical composition %
Mechanical properties
C max
Si max
Mn
P
S
Ti
Yield strength Rp0,2
Tensile strength, Rm (N/mm²)
Fracture elongation, A80
DX51D+ZM
1.0226
0,18
0,50
1,20
0,12
0,045
0,30
–
270 – 500
22%
DX52D+ZM
1.0350
0,12
0,50
0,60
0,10
0,045
0,30
140 – 300
270 – 420
26%
DX53D+ZM
1.0355
0,12
0,50
0,60
0,10
0,045
0,30
140 – 260
270 – 380
30%
DX54D+ZM
1.0306
0,12
0,50
0,60
0,10
0,045
0,30
120 – 220
260 – 350
36%
DX55D+ZM
1.0309
0,12
0,50
0,60
0,10
0,045
0,30
120 – 220
270 – 370
30%
DX56D+ZM
1.0322
0,12
0,50
0,60
0,10
0,045
0,30
120 – 180
260 – 350
39%
DX57D+ZM
1.0853
0,12
0,50
0,60
0,10
0,045
0,30
120 – 170
260 – 350
41%
Surface finish and quality
Surface finish and quality
A
normal surface
Imperfections such as small pits, different spangle sizes, dark spots, stripe-shaped marks, and small passivation defects are acceptable. Straightening and bending fractures and zinc runoff waves may be visible.
B
improved surface
This type of surface is attained by skin passing. A small number of fractures in stretch forming direction, finishing imprints, scratches, impressions, spangle structures, zinc runoff waves and slight passivation errors may occur.
Storage and warehousing
Packaging must protect the material against defects and external influences.
The material must have appropriate packaging for transportation.
Max humidity 70%.
Recommended storage temperature + 15…25Co.
Min storage temperature + 5Co.
Max temperature fluctuation 10 degrees
Processing permitted if the material has reached a temperature of the plant.
In winter, open the package when the material has reached a temperature of the plant, it is recommended to wait 4 days.
NB! Warehousing indoors only.
Sellel veebilehel kasutatakse küpsiseid. Veebilehe kasutamist jätkates nõustute küpsiste kasutamisega. NõustunLoe lähemalt
Privaatsuspoliitika
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.